UK lawn seed collection

Choose Grass Seed to Suit Your Lawn

Start with the job, repairing patches, overseeding a thin lawn or sowing a new one, then pick the mix for your conditions. Every mixture below states its species, its declared sowing rates and its own sowing window, so you can compare like for like.

Three jobs, one choice of mix

Repairing bare patches

Rake out the dead grass, loosen the bare soil and sow into that patch. A general lawn mix does this job well, and most products come in pack sizes small enough for a few repairs rather than a whole lawn.

Overseeding a thin lawn

Choose the mix for the condition that thinned the lawn in the first place, shade or wear, rather than the cheapest general blend. Most products here declare a separate, lower overseeding rate than their new-lawn rate.

Sowing a new lawn

Decide on the site and the traffic first, then buy for it. A new sowing uses the higher of the declared rates, and the seedbed matters as much as the mix. Our pre-seeder feed is declared for use around sowing.

Seed is only half of it: preparing the surface and keeping it moist while it establishes matter just as much. See how to overseed a lawn and what is the best grass seed for UK lawns.

Lawn seed by use and condition

Each card links to the live product page with the current price, pack sizes, the species in the mixture and the manufacturer's declared sowing rates. Where a mixture comes in more than one pack size, the card shows the lowest price.

General-purpose lawn seed

Mixes described for new lawns and overseeding, and for the everyday family lawn. These contain ryegrass, so they establish and wear better than the fine fescue mixes, with a slightly coarser leaf.

Premier Landscape & Lawn states its contents as 80% agricultural perennial ryegrass and 20% strong creeping red fescue, at 35g/m² overseeding and 50g/m² for a new lawn. PM51 Greenscape is described for high-traffic lawns and verges, PM50 Quality Lawn for a fine-leaved but hard-wearing lawn that also states shade tolerance, and PM50 Nitro carries a seed coating described by the manufacturer as supplying nutrition during establishment.

Fine lawns without ryegrass

Rye-free mixes blended from fine fescues for a dense, fine-textured sward that can be mown short. They suit ornamental lawns, and they ask for gentler use than the ryegrass mixes.

PM52 Greenfine is a blend of chewings, slender creeping red and strong creeping red fescue, declared at 35–50g/m² for a new sowing. PM20 Fineturf is 100% fine fescue, also described for golf tees and fairways.

Shade, damp and difficult ground

Two mixes for the places where a general lawn mix struggles: ground under trees or in low light, and soil that stays wet and heavy.

PM60 Greenshade is rye-free, includes rough-stalked meadow grass and is described as wear tolerant in shade; its record advises against mowing too short in shady conditions. PM28 Wetland is declared for damp, waterlogged and heavy soils at 25–35g/m².

Heavy wear, family and sport

Ryegrass-based mixes built for football, dogs and daily footfall, up to pitch and sports-ground levels of use. Quicker to establish and quicker to recover than the fescue mixes.

PM70 Recreation is described for winter and summer games, PM65 Heavy Wear for surfaces under extreme wear including equestrian turf, PM35 Universal for close-mown sport and PM36 Wicket as 100% perennial ryegrass for fine, close-mown surfaces. All declare separate new-sowing and overseeding rates.

Low-maintenance, dry and poor soil

Mixtures chosen where mowing, feeding and watering are kept to a minimum: banks, rough areas, dry ground and lawns on thin soil. Two of them include micro-clover to cut the feed the lawn needs.

PM29 All Season is 100% tall fescue for drought tolerance and low maintenance. PM25 Grow-Slow and PM25R Grow-Slow Plus are low-growing fescue mixes for roughs and embankments, the Plus version adding tetraploid ryegrass for faster cover. PM26 Ecosward and PM27 Ecosward Plus include micro-clover, with PM27 the harder-wearing of the two.

Specialist fine turf: golf, bowling and bowls

Very fine, close-mown mixtures for greens, tees and fairways rather than a garden lawn. Their declared sowing rates are much lower than lawn mixes, and they need the mowing and feeding regime that goes with them.

PM10 Traditional Green is described for golf and bowling greens, PM15 Allbent is 100% browntop bentgrass, PM13 Fescue Green is 100% fine fescue, PM5 Economy Green is a fescue and bentgrass blend and PM40 Tee & Fairway is described for tees, fairways and cricket outfields. PM45 Tee & Fairway Plus adds perennial ryegrass for faster renovation. PM15 declares 10g/m² for a new sowing.

Paddock and grazing seed

Grazing mixtures rather than lawn seed, quoted per acre. They are here because customers often buy them alongside lawn seed.

Both are declared at 13kg per acre for a new seeding and 7kg per acre for overseeding. The Horse and Pony mix states that it contains no high-sugar grasses, which is why it is aimed at grazing animals rather than general pasture.

What the species in a mix actually mean

A mixture is a blend of grasses chosen for a reason. Reading which species a mix uses tells you more than the name on the bag.

Perennial ryegrass
The backbone of hard-wearing family and sports mixes. It establishes quickly and takes wear, with a coarser leaf than the fescues.
Fine fescues (creeping red, chewings, hard fescue)
Finer texture and a denser sward for ornamental lawns. The rye-free mixes here are built on fescues, which need less feeding but recover more slowly from heavy use.
Browntop bent
A very fine grass used for close-mown golf and bowling surfaces, not for a general garden lawn.
Rough-stalked meadow grass
Included in the shade mix, where its tolerance of low light is the reason it is there.
Tall fescue
A coarser, deep-rooted grass used in the low-maintenance mix for dry sites and situations where inputs are kept low.
Micro-clover
Added to the Ecosward mixes, where its role is to fix nitrogen and reduce the feed the lawn needs.

We do not publish a germination speed or a guaranteed establishment figure for these mixtures: those depend on soil temperature, moisture and seedbed preparation as much as on the seed. The species and the declared sowing rates are on each product page.

Working out how much seed you need

Our grass seed calculator takes your area, whether you are overseeding or sowing new, and a seed type, then applies typical rates of 25–40g/m² depending on those choices. Two things to know.

  • The seed types in the calculator are general categories, not a specific mixture from this page.
  • Declared rates vary widely: PM15 Allbent asks for 10g/m² on a new sowing while lawn mixes ask for 35–50g/m², and the paddock mixes are quoted per acre. Use the rate on the bag, and buy by the coverage it states.

Grass seed buying questions

Choosing a mixture, and what the pack will tell you.

Not sure which mixture suits your lawn?

Tell our lawn advisor about the lawn and the light it gets, or work out the quantity with the calculator first.

The product label and the pack set out the species, sowing rate and sowing window for each mixture, and those figures come from the product records here. Establishment depends on the seedbed, moisture and temperature, so no germination result is guaranteed.